Page 90 - Manual Oficina Polaris RS1 2018 e 2019
P. 90
ENGINE / COOLING SYSTEM
OIL PRESSURE TEST 4. Remove the plug and insert the oil pressure adapter.
Torque the adapter to specification.
1. Attach the Oil Pressure Gauge Adapter (PU-52492)
to the Oil Pressure Gauge (PV-43531). TORQUE
Oil Pressure Gauge: PV-43531 PU-52492: 22 ft-lbs (30 Nm)
Oil Pressure Gauge Adapter: PU-52492
5. Start engine and allow it to reach operating
2. Clean the area around the main oil gallery plug , temperature, monitoring gauge indication.
located in the upper crankcase on the MAG side of
the engine. NOTE
3. Clean the area around the main oil gallery plug q, Test results are based on the use of the recommended
located in the upper crankcase on the MAG side of engine oil (Polaris PS-4 or PS-4 Extreme Duty) at
the engine. operating temperature, and may vary considerably if
any other oil is used or if engine is not up to
temperature.
Oil Pressure Specification (Engine Hot):
Minimum @ 1200 RPM: 10 PSI
Minimum @ 7000 RPM: 40 PSI
6. Upon assembly, torque the crankcase gallery plug to
specification.
TORQUE
Crankcase Oil Gallery Plug:
22 ft-lbs (30 Nm)
3.4 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
