Page 102 - Manual Oficina Polaris RZR 570 13-18

ENGINE / COOLING SYSTEM

GENERAL INFORMATION

SPECIAL TOOLS OIL PRESSURE TEST
1. Attach the Oil Pressure Gauge Adapter to the Oil
PART TOOL DESCRIPTION Pressure Gauge.
NUMBER
PW-47053 Bench Mount Engine Stand Adapter Oil Pressure Gauge Adapter: PU-50569
Oil Pressure Gauge: PV-43531
PU-50658 Clutch Center Distance Tool
Crankshaft Removal / Installation 2. Remove the seats and engine service panel.
PU-50784
Tool Kit
3. Clean the area around the main oil gallery plug q,
Cylinder Holding & Camshaft Timing
PU-50563 located on the oil filter adapter housing.
Plate
PU-50624 Engine Stand (2” Bore)
Engine Stand Adapter (Mounts To
PU-50824
The Engine)
Engine Stand Sleeve Adapter (Use
PU-50625
With 2” Bore Stand)
Engine Stand Sleeve Adapter (Use
PW-47054
With 2.375” Bore Stand)
PA-49316 Flywheel Puller
PU-50105 Oil Filter Wrench
PV-43531 Oil Pressure Gauge
PU-50569 Oil Pressure Gauge Adapter
4. Remove the plug and insert the oil pressure adapter.
PA-49317 Stator Cover Removal Handles
5. Start engine and allow it to reach operating
PV-1253 Valve Spring Compressor
temperature, monitoring gauge indication.
PV-43513-A Valve Spring Compressor Adapter
NOTE
Water Pump Mechanical / Oil Seal
PU-50689 Test results are based on the use of the recommended
Installation Kit
engine oil (PS-4) at operating temperature, and may
Bosch Automotive Service Solutions : 1-800-328- vary considerably if any other oil is used or if engine is
6657 or http://polaris.service-solutions.com/
not up to temperature.
6. Upon assembly, torque the crankcase gallery plug to
ENGINE LUBRICATION SPECIFICATIONS
specification.
FLUID CAPACITY TORQUE
Oil Capacity: 2 Quarts (1.9 L) Oil Gallery Plug:
Oil Filter Wrench: PU-50105 or 2.5″ (64 mm) 12 ft-lbs (16 Nm)
Oil Type: Polaris PS-4 Synthetic Engine Oil
Oil Pressure:
(using Polaris PS-4 at operating temperature)
10 PSI @ 1200 RPM (Minimum)
40 PSI @ 7000 RPM (Minimum)

3.4 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.