Page 429 - Manual Oficina Polaris RZR 570 13-18

BODY / FRAME

Assemble the rear cab frame and the front cab frame at the TORQUE
1. coupler joints and secure with four (3/8-16 x 1 1/4) screws q
and 3/8-16 Nyloc nuts. Tighten screws to specification. 3/8-16 x 1 1/4 Fasteners: 28 ft-lb (38 Nm)

Place the assembled cab frame onto the vehicle and align the
rear mount holes. Fasten the rear cab frame brackets to TORQUE
2. vehicle with four (5/16-18) bolts w and (5/16-18) nuts. Fasten 5/16-18 Fasteners:
the two self-tapping screws e to the rear inner portion of the
bracket on each side. Tighten screws to specification. 15 ft-lbs (20 Nm)
Place the straps from the safety net over the front coupler
3.
posts.
Fasten the front of the cab frame to the base brackets and TORQUE
4. secure with four (3/8-16 x 1 1/4) screws r and (3/8-16 Nyloc)
nuts. Tighten fasteners to specification. 3/8-16 x 1 1/4 Fasteners: 28 ft-lb (38 Nm)

Attach side bars to cab frame using M8 screws and nuts t on TORQUE
5.
top and bottom. Tighten to specification.
M8 Fasteners (Hip Bolster): 8 ft-lb (11 Nm)

10

9926813 R06 - 2013-2016 RZR 570 Service Manual 10.3
© Copyright Polaris Industries Inc.