Page 274 - Manual_Polaris_RZR_ProXP-20-21

EFI / FUEL SYSTEM

FUEL LINE REMOVAL / INSTALLATION
(EVAP)

q Fuel Supply Line r Zip Tie (attached to fuel purge line)
w Fuel Purge Line t Double Clip (attached to frame)

e Retaining Clips (attached to fuel pressure regulator
bracket)

1. Place a shop towel around the fuel line to catch any 3. Release the fuel line from applicable retaining clips/
dripping fuel. zip ties. See image/table above.
2. To remove fuel line q, pull open tabs while moving 4. Remove fuel line from the vehicle.
the clip out to release the line.
5. To install the line, verify the connectors are clean and
free of debris.
6. Place the fuel line back over the fitting and slide
connector locking mechanism back into place. Verify
connector tabs snap back into place.

7. Turn the key on to prime the system. Check for
leaking at each end of the fuel line.

5.14 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.