Page 35 - Manual_Polaris_RZR_ProXP-20-21

GENERAL INFORMATION

Yes • Continue to step u 1

• Remove PVTcover if necessary and check belt for damage or unusual wear.
Refer to Belt Inspection for more information.
y Will the vehicle • If no damage is found, using the aid of an assistant slowly rev engine
move under its own observing clutch engagement. If no engagement is seen refer to PVT System
power? Troubleshooting.
No
• Using the aid of an assistant verify the propshaft is turning, while the clutch is
engaged. If the driveshaft is turning refer to Differential Diagnosis /
Disassembly in the applicable service manual.
• If the driveshaft is not moving, concern may be within transmission. Refer to
the necessary section in the applicable service manual.

• If the concern is related to the PVTsystem, Transmission, or Final Drive,
refer to the applicable section in the service manual.
• If the concern is electrical systems related, refer to Electrical
Troubleshooting.
• If the concern is overheating or related to the cooling system, first refer to
u Test drive vehicle
for concern. Over Heating page 1.33 , then Cooling Troubleshooting page 1.37.
• If the concern is driveability related (lack of power, misfire, etc.), refer to Fuel
System Troubleshooting page 1.60, or Cylinder Misfire Detection page 1.58.
These concerns may also be caused by a mechanical failure.
• If the concern can not be diagnosed or repaired using normal diagnostic
means, please contact Polaris Technical Service Team.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 1.29
© Copyright Polaris Industries Inc.