Page 536 - Manual_Polaris_RZR_ProXP-20-21

BODY / FRAME

4. Adjust the door until the front latch is centered both 6. Install door panel onto the door frame. Torque
vertically and horizontally on the striker rod as shown. fasteners to specification.
TORQUE
Door Panel Fasteners:
35 in-lbs (4 Nm)

TORQUE
Door Trim Bracket Fasteners:
18 in-lbs (2 Nm)

NOTICE
If it is difficult to center vertically and horizontally, loosen
striker assembly fasteners w for extra adjustment.
Once aligned, torque striker fasteners.

TORQUE
Door Striker Fasteners:
7 ft-lbs (10 Nm)

5. Holding the door in position, tighten the top hinge
bracket fasteners e, and then the bottom fasteners
r. Torque to specification.

TORQUE
Hinge Bracket Fasteners:
18 ft-lbs (24 Nm)

11.24 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.