Page 466 - Manual Oficina XP 1000 14-16

BODY / FRAME

REAR FENDER FLARE / REAR FENDER 4. Remove the plastic rivets r and one T40 Torx
REMOVAL XP 4 fastener t retaining the rear fender.

1. Remove the three plastic rivets on the lower fender
flare q. Remove the four T40 Torx screws w.

5. Remove fender from the vehicle.

CARGO BOX ASSEMBLY REMOVAL
2. Remove the fender flare from the vehicle.
1. Remove both seats.
3. Remove air intake cover e if removing left side
fender. 2. Remove the PVT pre-filter (driver side) and air intake
pre-filter (passenger side) assembly.
3. Remove the T-25 Torx screw retaining each shock
reservoir hose cover and remove the cover..
4. Loosen the shock reservoir clamps and maneuver
the reservoir through the hole in the box.
NOTE
Do NOT let the reservoir hang by the hose. Use a wire
or string to restrain the reservoir.

5. Remove the four bolts retaining each rear cab frame
and remove it from the vehicle. Remove the bolts
retaining the hip bolsters to the cab frame hoop.

6. Remove the eight fasteners retaining the rear cab
frame to the frame and to the front cab frame.
Remove the rear cab frame from the vehicle.

10.22 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.