Page 219 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

570 ENGINE
DESCRIPTION TORQUE
Flywheel Retaining Nut 133 ft-lbs (180 Nm)
Torque to specification, back of 180 degrees,
retorque to specification.
Camshaft Sprocket Bolt 14 ft-lb (19 Nm)
Replace camshaft sprocket bolt if loosened or
removed.
Intermediate Mag Cover 9 ft-lb (12 Nm) 3

Oil Filter Lubricate seal with engine oil. Turn by hand until
filter gasket contacts sealing surface, then turn an
additional 3/4 turn

Oil Gallery Plug 11 ft-lbs (15 Nm)
Apply Loctite 516 sealant to first two thread under
plug head
Oil Pan Drain Plug 12 ft-lbs (16 Nm)
Oil Pickup 59.75 in-lbs (6.75 Nm )

Oil Pressure Regulator 20 ft-lbs (27 Nm)
Oil Pressure Regulator Valve Cover 8.8 ft-lbs (12 Nm)

Oil Pump Cover Bolts 7 ft-lbs (10 Nm)
Oil Pump Sprocket Bolt 9 ft-lbs (12 Nm)
One Way Clutch Retaining Bolts 9 ft-lbs (12 Nm)
Apply Loctite® 272™
Radiator hose clamp 36 in-lbs (4 Nm)
Stator Cover 9 ft-lbs (12 Nm)
Torque in Sequence
Spark Plug 9 ft-lbs (12 Nm)
Do Not Apply Anti-seize
Thermostat Cover Bolt 7.3 ft–lbs (10 Nm)
Starter Motor Bolts 7 ft-lbs (10 Nm)

Stator Wire Bracket Bolts 6 ft-lbs (9 Nm)
Apply Loctite® 242™

Stator Cover 9 ft-lbs (12 Nm)
Torque in Sequence
Valve Cover Bolts 7 ft-lbs (10 Nm)

Water Pump Cover Fastener 9 ft-lbs (12 Nm)
Torque in Sequence

NOTE: Refer to the diagrams and procedures within the chapter for fastener identification.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.97
© Copyright Polaris Industries Inc.