Page 227 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

REF. DESCRIPTION NOTES
q Cylinder Apply ENGINE OIL to bottom 50 mm of cylinder bore and to piston
rings before assembly.

w Cylinder Base Gasket Ensure tab is visible to verify assembly.

e Piston Assembly Apply ENGINE OIL to bottom 50 mm of cylinder bore and to piston
rings before assembly.
r O-ring Ensure O-ring seals are seated in C’bores before assembly.

t Straight Filter Adapter Torque: 20 ft-lbs (28 Nm) 3
y Oil Filter Lubricate seal with engine oil prior to filter installation.

u Screw Torque: 20 ft-lbs (28 Nm)

i Plug Torque: 11 ft-lbs (16 Nm)
o Drain Plug Torque: 11 ft-lbs (16 Nm)

a Screw Torque: 106 in-lbs (12 Nm)
s Screw Torque: 106 in-lbs (12 Nm)

d Gear Sprockets to be installed so that “OUT” is visible.
f Gear
g Screw Torque: (12 Nm)
Replace if loosened or removed.
h Oil Pump Cover Apply ENGINE OIL to bore of oil pump cover prior to assembly.

j Gerotor Outer Gerotor dots must not be visible after assembly.
k Gerotor Inner Gerotor Slot must be visible after assembly

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.105
© Copyright Polaris Industries Inc.