Page 363 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FUEL SYSTEM

ECT SENSOR REPLACEMENT - 325

1. Remove the seat and right side panel.
2. Remove the PVT outlet ducting to access the ECT
sensor.
3. Drain coolant to level below sensor.
4. Disconnect harness from the sensor (1).

4

NOTE
Image for reference only.

5. Using a wrench, remove and replace the sensor,
applying a light coating of thread sealant to aid
installation.
6. Torque the sensor to specification.

TORQUE
ECT Sensor:
17 ft-lbs (23 Nm)

7. Add the required amount of coolant and properly
bleed the cooling system (see Engine chapter).
8. Install the PVToutlet ducting.
9. Install the seat and right side panel.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 4.47
© Copyright Polaris Industries Inc.