Page 43 - Manual Oficina Polaris Sportsman 570 2014 a 2016

GENERAL INFORMATION

570 ENGINE
1
DESCRIPTION TORQUE
Torque The Outer M6 Head Bolts 89 ± 9 in-lbs (10
± 1 Nm)
Cylinder Head Bolts - Silver Apply light coat of engine oil to bolt threads and
under bolt head
Torque in Sequence for all steps
Step 1: 18 ft-lbs (25 Nm)
Step 2: 30 ft-lbs (40 Nm)
Step 3: Loosen all fasteners until they are
unseated
Step 4: 15 ft-lbs (20 Nm)
Step 5: 26 ft-lbs (35 Nm)
Step 6: Additional 180°
Step 7: Additional 180°
Torque The Outer M6 Head Bolts 89 ± 9 in-lbs (10
± 1 Nm)

Engine Mount Isolators, Front 23 ft-lbs (31 Nm)
Engine Mount, Rear 23 ft-lbs (31 Nm)
Engine Mount to Engine 37 ft-lbs (50 Nm)

ETC Fasteners 7 ft-lbs (10 Nm)
Exhaust Manifold Bolts 18 ft-lbs (24 Nm)

Exhaust Mounting Fasteners 15 ft-lbs (20 Nm)
Exhaust Shield Mounting Fasteners Torque until fully seated.

Flywheel Retaining Nut 133 ft-lbs (180 Nm)
Torque to specification, back of 180 degrees,
retorque to specification.

Camshaft Sprocket Bolt 14 ft-lb (19 Nm)
Replace camshaft sprocket bolt if loosened or
removed.

Intermediate Mag Cover 9 ft-lb (12 Nm)
Oil Filter Lubricate seal with engine oil. Turn by hand until
filter gasket contacts sealing surface, then turn an
additional 3/4 turn
Oil Gallery Plug 11 ft-lbs (15 Nm)
Apply Loctite 516 sealant to first two thread under
plug head
Oil Pan Drain Plug 12 ft-lbs (16 Nm)

Oil Pickup 59.75 in-lbs (6.75 Nm )
Oil Pressure Regulator 20 ft-lbs (27 Nm)
Oil Pressure Regulator Valve Cover 8.8 ft-lbs (12 Nm)

Oil Pump Cover Bolts 7 ft-lbs (10 Nm)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 1.39
© Copyright Polaris Industries Inc.