Page 591 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BRAKE SYSTEM

REAR MASTER CYLINDER EXPLODED VIEW (ALL MODELS)

REAR MASTER CYLINDER REMOVAL / TORQUE
INSTALLATION
Brake Line Flared Fittings:
1. Remove the RH footwell to gain access to the rear 15 ft-lbs (20 Nm)
master cylinder.
2. Remove the rear brake lines from the master 6. Perform brake bleeding procedures as outlined in
cylinder. Use a suitable container to catch the brake this chapter.
fluid. Dispose of brake fluid properly.
9
3. Remove the two bolts that secure the rear master
cylinder to the brake mount plate. Replace parts as
needed.
4. To install the rear brake master cylinder, mount the
master cylinder to the mount plate and torque bolts
to specification.

TORQUE
Rear Master Cylinder-to-Frame Bolts:
17 ft-lbs (23 Nm)
5. Reinstall the brake line and torque the banjo bolt to
specification depending on the style of fitting.
TORQUE
Brake Line Banjo Bolt:
15 ft-lbs (20 Nm)

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 9.33
© Copyright Polaris Industries Inc.