Page 645 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BODY / FRAME

PASSENGER SEAT CONVERSION 5. Lower the operator backrest to create the passenger
1. Make sure the cargo box dump latches are securely seat. Two retaining pins under the seat should fit into
latched. the two grommets on the seat base.
2. Slide both operator backrest latches inward to unlock
the backrest.

6. Test the passenger seat lock-out by attempting to
release the cargo box dump lever. If the dump lever
releases, the seat is not secure. Repeat the set-up
3. Tilt the backrest slightly forward towards the front of procedure. If the lock-out is not working properly,
the vehicle and pull the passenger backrest upward it must be repaired before allowing any
from the bed of the cargo box. passenger to ride on the vehicle.

7. To return the vehicle to single-rider set-up, reverse
all previous steps. Always lower the passenger
backrest to the lowest position before folding it down
into the cargo box. Slide the operator backrest
latches outward to secure the locks.

4. Lift the adjustment latch at the top of the passenger 10
backrest. Raise the backrest to the desired position.
Release the latch, making sure it locks into one of
the three adjustment positions.
NOTE
The backrest must be moved out of the lowest position
before it can be secured in the upright position. The
lowest position is for seat storage only. Do not leave the
backrest in the lowest position. Always adjust the
backrest to one of the three adjustment positions.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 10.51
© Copyright Polaris Industries Inc.