Page 358 - Manual Oficina Polaris RZR 570 13-18

FINAL DRIVE

12. Carefully install the LH output hub assembly into the GEARCASE INSTALLATION
cover plate. Take care not to damage the new cover 1. Install the gearcase back into the vehicle through the
plate seal while installing the output hub. left-hand wheel well area, between the upper and
lower A-arms.

2. Install the prop shaft onto the front gearcase input
13. Install the output cover assembly onto the gearcase shaft. Use a NEW spring pin in the front prop shaft.
housing. Install the seven cover plate screws and
torque to specification. 3. Install the four bolts q retaining the front gearcase to
the frame. Torque fasteners to specification.

TORQUE
TORQUE
Front Gearcase Mounting Bolts:
Cover Plate Screws: 30 ft-lbs (41 Nm)
100 in-lb (12 Nm)
4. Install the vent line and AWD harness.
5. Install both front drive shafts into the gearcase. Refer
to Front Drive Shaft Installation, page 7.12
6. Add the proper lubricant to the front gearcase.

Polaris Demand Drive Fluid:
2877922

Front Gearcase Capacity:
6.75 fl. oz. (200 ml)

7.34 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.