Page 449 - Manual Oficina Polaris RZR 570 13-18
P. 449

ELECTRICAL

                   GENERAL INFORMATION

                   SPECIAL TOOLS                                         UNDER-DASH COMPONENTS
                                                                         The following switches and components can be
                    PART NUMBER      TOOL DESCRIPTION
                                                                         accessed underneath the instrument / dash panel:
                    PV-43568         Fluke™ 77 Digital Multimeter        • Speedometer
                                                                         • Digital Wrench Diagnostic Connector
                    PV-43526         Connector Test Kit
                                                                         • AWD Switch
                    2870630          Timing Light                        • 12 Vdc Accessory Power Point
                                                                         • Ignition Switch / Headlamp Switch
                    PU-50338         Battery Hydrometer                  • Fuse / Relay Box

                    2460761          Hall Effect Sensor Probe Harness
                    2871745          Static Timing Light Harness
                    -                Digital Wrench (see Chapter 4)

                   Bosch Automotive Service Solutions – 1-800-328-6657
                   or http://polaris.service-solutions.com/


                   ELECTRICAL SERVICE NOTES
                   Keep the following notes in mind when diagnosing an
                   electrical problem:
                   • Refer to wiring diagram for stator and electrical compo-
                     nent resistance specifications.
                   • When measuring resistance of a component that has a
                     resistance value under 10 Ohms, remember to sub-
                     tract meter lead resistance from the reading. Connect
                     the leads together and record the resistance. The re-
                     sistance of the component is equal to tested value mi-
                     nus the lead resistance.
                   • Become familiar with the operation of your meter. Be
                     sure leads are in the proper jack for the test being per-
                     formed (i.e. 10A jack for current readings). Refer to the
                     Owner’s Manual included with your meter for more
                     information.
                   • Voltage, amperage, and resistance values included in
                     this manual are obtained with a Fluke™ 77 Digital Mul-
                     timeter (PV-43568). This meter is used when diagnos-
                     ing electrical problems. Readings obtained with other
                     meters may differ.
                   • Pay attention to the prefix on the multimeter reading
                     (K, M, etc.) and the position of the decimal point.
                   • For resistance readings, isolate the component to be
                     tested. Disconnect it from the wiring harness or power
                     supply.
                                                                                                                            11

















                   9926813 R06 - 2013-2016 RZR 570 Service Manual                                                      11.3
                   © Copyright Polaris Industries Inc.
   444   445   446   447   448   449   450   451   452   453   454