Page 453 - Manual Oficina Polaris RZR 570 13-18

ELECTRICAL

Programmed Service Interval 8. Press and hold the MODE button until the hour
segment flashes. Release the button.
9. With the segment flashing, tap the MODE button to
advance to the desired setting.
10. Press and hold the MODE button until the next
segment flashes. Release the button.
11. Repeat steps 3-4 twice to set the 10 minute and 1
minute segments. After completing the 1-minute
segment, step 4 will save the new settings and exit
the clock mode.
Units of Measurement
STANDARD METRIC
DISPLAY DISPLAY
The initial factory service interval setting is 50 hours. Kilometers (KM/
Each time the engine is started, the engine hours are Distance Miles (MPH) H)
subtracted from the service interval hours. When the
service interval reaches 0, the LCD wrench icon will Time 12-Hour Clock 24-Hour Clock
flash for approximately 10 seconds each time the
engine is started. Tempera- Fahrenheit Celsius
ture
To change the hour setting or reset the function,
follow these steps:
To change between Standard and Metric units of
3. Toggle the MODE button until the wrench icon is measurement, follow these steps:
displayed in the information area.
12. Turn the key to the OFF position.
4. Press and hold the MODE button until the
information display area begins to flash. 13. Press and hold the MODE button while turning the
key to the ON position.
5. Toggle the MODE button to increase the service
interval hours in 5 hour increments to a maximum of
100 hours.
6. To turn off the service interval function, toggle the
MODE button until “OFF” is displayed.
Clock

11

The clock displays the time in a 12-hour or 24-hour
format. Refer to “Units of Measurement” to change
the format (Standard 12-hour / Metric-24 hour). To
set the clock, follow these steps:
7. Toggle the MODE button until the odometer is
displayed.

9926813 R06 - 2013-2016 RZR 570 Service Manual 11.7
© Copyright Polaris Industries Inc.