Page 202 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

CYLINDER HEAD DISASSEMBLY 3. Push down on spring and remove split keepers e.

WARNING
Wear eye protection during cylinder head disassembly
and reassembly or when working with the valve springs.

NOTICE
Keep mated parts together and in order with respect to
their location in the cylinder head for assembly
purposes. It is important to install cylinder head
components back in the same location. Mark each
component or place them in an organized rack as you
remove them.

1. Remove the valve tappet and note the number on the
bottom side of the tappet q. 4. Slowly release valve spring pressure and remove the
compressor adapter.
5. Remove the valve retainer r, valve spring t and the
valve stem seal / seat y. Discard the valve seal.
6. Lift up the cylinder head and push the valve u out,
keeping it in order for reassembly in the same valve
guide.
7. Repeat the previous steps to remove the remaining
valves.
8. Clean the combustion chamber and head gasket
surface.

2. Compress the valve spring by hand using valve
spring compressor adapter PV-43513-A w.

3.58 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.