Page 198 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

3. Remove the two bolts retaining the fixed cam chain 7. Remove the remaining bolt from each camshaft
guide t and remove the assembly from the engine. sprocket.
8. Lift the chain and sprockets off the camshafts to allow
each sprocket to be removed.
9. Using a paperclip or other tool, hold cam chain up.
NOTICE
The crankcase has a built-in lower guide to prevent the
chain from falling off the crankshaft.

10.Evenly loosen the four bolts retaining each rear
camshaft carrier o and carefully lift the carriers off
the camshafts.

4. Remove the remaining two bolts that retain the front
camshaft carrier y and carefully lift the carrier off the
camshafts.

11. Mark the intake a and exhaust s camshafts to
ensure proper assembly.
12.Carefully remove camshafts from the cylinder head.

CAMSHAFT SPROCKET INSPECTION
5. Hold camshafts u with an open-end wrench , and
remove the top bolt i from each camshaft sprocket. Inspect cam sprocket teeth for wear or damage q.
Replace timing chain and sprockets if worn or damaged.

6. Rotate the engine to allow access to the remaining
bolt on each camshaft sprocket.

3.54 9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.