Page 181 - Manual Oficina XP 1000 14-16

FUEL SYSTEM

FUEL INJECTOR TEST FUEL INJECTOR REPLACEMENT
1. Remove the cargo box assembly (see Chapter 10 –
NOTE Cargo Box Assembly Removal, page 10.22).

Take note of PTO and MAG fuel injector harness 2. Be sure the engine has cooled enough to work on.
connectors before disconnecting them. The harness
leads are marked with PTO and MAG identifiers. 3. Loosen the hose clamps q retaining the intake
plenum w to the throttle body.

4

The fuel injectors are non-serviceable. If diagnosis 4. Remove the two screws e retaining the intake
indicates a problem with either injector, test the plenum.
resistance of the fuel injector(s) by measuring between
the two pin terminals w:

5. Remove the driver’s seat and disconnect the
negative battery cable.
Fuel Injector Resistance Specification:
11.4 - 12.6 Ω

NOTE

Be sure to connect the PTO harness lead to the PTO
injector and the MAG harness lead to the MAG injector
to ensure proper engine operation.

9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual 4.13
© Copyright Polaris Industries Inc.