Page 200 - Manual Oficina XP 1000 14-16

FUEL SYSTEM

CPS REPLACEMENT
1. If not done already; disconnect the CPS harness
connector (see Chapter 4 – CPS Test, page 4.31).
2. Using an 8mm socket, remove the CPS retaining bolt
q and remove the sensor w from the stator cover.

3. Unclip the wire harness retainer e and remove the
CPS harness from the retainer to allow replacement.

4. Install new sensor using a light coating of oil on the
O-ring to aid installation.
5. Torque the CPS retaining bolt to specification.
TORQUE

CPS Retaining Bolt:
9 ft-lb (12 Nm)

4.32 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.