Page 378 - Manual Oficina XP 1000 14-16

STEERING / SUSPENSION

SPRING ADJUSTMENT (WALKER EVANS) Shock Spanner / Clutch Spreader Tool:
The front and rear shocks have a ride height adjustment. 2878925
Suspension springs may be adjusted to suit different
riding conditions or vehicle payloads.
NOTE
WARNING Polaris does not recommend increasing the spring
adjustment by more than one inch (25.4 mm) over the
Uneven adjustment may cause poor handling of the factory setting w as it may negatively impact vehicle
vehicle, which could result in serious injury or death. stability. Always return the spring preload to the factory
Always adjust both the left and right spring equally. setting after the load is removed from the vehicle.

The factory setting is appropriate for nearly all riding
conditions. If desired, the spring setting may be adjusted
to maintain vehicle clearance height when carrying
loads.
1. Raise and safely support front or rear of the vehicle
off the ground to allow the suspension to fully extend.
2. Using the shock spanner/spreader tool (PN 2878925)
included in the vehicle’s tool kit, turn the adjustment
collar q to increase or decrease ride height.

Spring Adjustment - Factory Setting (approx.)
YEAR MODEL FRONT REAR
RZR XP 1000 2.15″ 7.47″
2014
RZR XP 4 1000 3.18″ 7.05″
RZR XP 1000 (built 10/26/2014 and before) 2.15″ 7.50″
RZR XP 1000 (built 10/27/2014 and after) 2.15″ 9.88″
2015 RZR XP 4 1000 3.18″ 7.05″
RZR XP 1000 Desert Edition 2.15″ 9.88″
RZR XP 1000 High Lifter 2.64″ 6.22″
RZR XP 1000 2.15″ 9.88″
RZR XP 4 1000 3.18″ 7.05″
2016
RZR XP 1000 High Lifter 2.64″ 6.22″
RZR XP 4 1000 High Lifter 3.32″ 8.02″

8.30 9926816 R06 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.