Page 233 - Manual Oficina Polaris RZR XP 1000 17-18

FUEL SYSTEM

CPS REPLACEMENT 3. Unclip the wire harness retainer e and remove the
1. If not done already; disconnect the CPS harness CPS harness from the retainer to allow replacement.
connector (see Chapter 4 – CPS Testpage 4.38). 4. Install new sensor using a light coating of oil on the
O-ring to aid installation.
2. Using an 8mm socket, remove the CPS retaining bolt
q and remove the sensor w from the stator cover. 5. Torque the CPS retaining bolt to specification.
TORQUE
CPS Retaining Bolt:
9 ft-lb (12 Nm)

4

9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 4.39
© Copyright Polaris Industries Inc.