Page 253 - Manual Oficina Polaris RZR XP 1000 17-18
P. 253
FUEL SYSTEM
DIGITAL WRENCH® - DIAGNOSTIC Follow these steps to connect the diagnostic interface
CONNECTOR cable to the vehicle to allow Digital Wrench® use:
Located under the hood connected to a sealed plug q. 1. Assemble the SmartLink Module and attach the PC
Interface Cable to your laptop.
2. Remove the protective cap from the Digital Wrench®
connector.
3. Connect the Vehicle Interface Cable to the Digital
Wrench® diagnostic connector.
4. Turn the ignition key to the ‘ON’ position, select the
appropriate vehicle and wait for the status to display
‘Connected’ in the lower left corner of the screen.
5. Once connected, proceed with using Digital
Wrench®.
4
9928492 R06 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual 4.59
© Copyright Polaris Industries Inc.
