Page 103 - Manual Oficina Polaris Sportsman 570 2014 a 2016

MAINTENANCE

FRONT GEARCASE LUBRICATION To Change Gearcase Lubricant:
The front gearcase lubricant level should be checked and 1. Remove gearcase drain plug w located on the
changed in accordance with the maintenance schedule. bottom of the gearcase and drain oil. (The drain plug
• Be sure vehicle is level before proceeding and in is accessible through the skid plate.) Catch and
PARK discard used oil properly.
• Check vent hose e to be sure it is routed properly and 2. Clean and reinstall drain plug w using a new sealing 2
unobstructed washer. Torque to specification.
• The correct front gearcase lubricant to use is Polaris
Demand Drive Hub Fluid.= 3. Remove fill plug q. Inspect the O-ring.
4. Fill with the recommended fluid amount or to the
bottom of the fill plug hole threads.
5. Install / torque fill plug and check for leaks.

SHIFT LINK ROD MAINTENANCE

NOTE
Shift rod is preset at time of manufacturer.

1. Lubricate pivot points with a light aerosol lubricant or
grease if desired.

FLUID CAPACITY
Specified Lubricant:
Demand Drive Hub Fluid

Gearcase Capacity:
8.97oz. (265 ml.)

TORQUE
Front Gearcase Fill Plug:
8-10 ft-lbs (11-14 Nm)

Front Gearcase Drain Plug:
11 ft-lbs (15 Nm)

To Check the Lubricant Level:
The front gearcase lubricant level cannot be checked
with a dipstick. The gearcase must be drained and re-
filled with the proper amount of lubricant or be filled to the
bottom of the fill plug w hole threads. Refer to
procedures.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 2.37
© Copyright Polaris Industries Inc.