Page 309 - Manual Oficina Polaris Sportsman 570 2014 a 2016

ENGINE / COOLING SYSTEM

8. Install oil pan, and torque to specification in OIL PRESSURE REGULATOR (BYPASS) VALVE
sequence. INSPECTION
TORQUE The oil pressure regulator (bypass) valve is located in the
MAG side crankcase (B).
Oil Pan Fasteners
10 ft-lb (14 Nm)

3

1. Remove the fasteners that retain the oil pressure
regulator valve cover.
2. Unscrew the oil pressure valve q from the
crankcase.
3. Replace the oil pressure valve if the inner plunger
binds, sticks or does not operate smoothly.
4. Thoroughly clean the valve.
5. Install the oil pressure valve into the crankcase;
torque to specification.
TORQUE
Oil Pressure Regulator:
20 ft-lbs (27 Nm)

6. Install the oil pressure regulator valve cover; torque
to specification.

TORQUE
Oil Pressure Regulator Valve Cover:
8.8 ft-lbs (12 Nm)

CRANKCASE INSPECTION
1. Remove all traces of gasket sealer from the
crankcase mating surfaces. Inspect the surfaces
closely for nicks, burrs or damage.
2. Be sure alignment pins are in place where used.

3. Be sure oil passages are clean and free of any
cleaning solvent.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 3.187
© Copyright Polaris Industries Inc.