Page 457 - Manual Oficina Polaris Sportsman 570 2014 a 2016

TRANSMISSION

TRANSMISSION SERVICE

TRANSMISSION REMOVAL

1. Place vehicle in “park”. Raise and securely support
rear of ATV under the frame. Remove both rear
wheels.
2. Disconnect the BLACK (negative) battery cable from
the battery.
3. Remove:
• Seat
• Side Panels
• Rear Rack/Rack Support
• Rear Cab Assembly
• Left/Right Foot Wells
4. Disconnect the vehicle speed sensor and gear
selection switch connectors from the transmission.
5. Disconnect transmission vent hose from the nozzle.
6. Disconnect shift rod end from transmission bellcrank.
7. Remove PVT outer cover, drive and driven clutches,
and the inner PVT cover. (refer to Clutch Removal in
Chapter 6).
6
8. Remove fasteners securing upper control arms to
stabilizer brackets and transmission brackets.
9. Remove the stabilizer bar links from the upper
control arms. Remove lower shock-to-control arm
fasteners.
10. Remove both rear drive shafts from transmission.
11. Remove the fasteners securing the stabilizer
assembly to the upper frame.
12. Remove the two mounting bolts that secure the front
of the transmission to the frame.
13. Remove all lower transmission mounting fasteners
from each side.
14. Remove the upper transmission support bracket
completely from the ATV.
15. With the help of an assistant, lift and remove
transmission out of rear of frame while pulling the
output shaft from the propshaft yoke.

9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual 6.11
© Copyright Polaris Industries Inc.