Page 480 - Manual Oficina Polaris Sportsman 570 2014 a 2016

FINAL DRIVE

SPECIAL TOOLS FRONT GEARCASE

PART NUMBER TOOL DESCRIPTION FRONT GEARCASE REMOVAL AND
2872608 Roller Pin Removal Tool INSTALLATION
8700226 or PU-48951 CV Boot Clamp Tool
2870772 1 3/4” Straight Wrench GEARCASE REMOVAL
2872608 Roller Pin Removal Tool 1. Stop engine, place machine in Park and set parking
8700226 or PU-48951 CV Boot Clamp Pliers brake.
ADC Gearcase Piston 2. Properly raise and support vehicle.
PA-48542
Installation Tool
WARNING
Bosch Automotive Service Solutions: 1-800-328-6657 or
polaris.service-solutions.com Serious injury or death may result if machine tips or
falls. Be sure machine is secure before beginning this
service procedure. Wear eye protection when removing
GEARCASE FLUID / CAPACITY
and installing bearings and seals.
GEARCASE DESCRIPTION
3. Remove the left front wheel nuts and wheel.
Demand Drive
Centralized Hilliard Hub Fluid 4. Remove cotter pins, lower ball joint nuts and A-arms
8.97 oz. (265 ml) from the ball joints.

5. Pull the hub and strut assembly out and pull the
drive-shaft out of the gearcase.

7.4 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.