Page 604 - Manual Oficina Polaris Sportsman 570 2014 a 2016

BODY / FRAME

6. Remove the front bumper by gently the pulling the FRONT FENDER REMOVAL /
lower portion of the bumper away from the vehicle INSTALLATION
frame and sliding it down.
1. Remove the front rack / storage box lid and the front
bumper as outlined in this chapter.
2. Remove the seat and side panels, refer to the “SIDE
PANEL REMOVAL” section.
3. Remove the fasteners that secure the front fender to
the upper strut support.

7. To reinstall the front bumper, reverse order of
removal. Be sure that the 4 plastic locking tabs of the
front fender are properly seated into the 4 slots of the
upper front bumper.
8. Torque the (6) T27 fasteners to specification.
TORQUE 4. Remove the fasteners that secure the front fender to
T27 screws: the frame in the fuel tank mount area.
4-6 ft-lbs (6-8 Nm)

5. Remove the fuel cap and place a clean lint free shop
towel into the tank neck to keep any debris from
falling into the tank.

10.10 9926803 R06 - 2014-2016 Sportsman 325 / ETX / 450 HO / 570 Service Manual
© Copyright Polaris Industries Inc.