Page 210 - Manual Oficina Polaris RS1 2018 e 2019

FUEL SYSTEM

1. From the canister filter, route fuel vent line under fuel VENT LINE TERMINATION FITTING
purge and fuel EVAP lines. Secure vent line to the This fitting should be inspected and tested using a Mity
seat bracket support with two hinge clips w. Vac™ to ensure proper venting. Connect the Mity Vac to
the fitting and give it 5 pumps. The gauge should return
to 0 immediately or there is an obstruction.

2. Route vent line up the lower rocker tube, and secure
with two hinge clips w.
3. Route vent line along outside of the intake and attach
the vent line to the fitting e in the frame. NOTE
If the vent line fitting is removed from the frame, it must
be replaced. The ears on the clip (arrows) will not hold
properly once it is removed.

4.24 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.