Page 211 - Manual Oficina Polaris RS1 2018 e 2019

FUEL SYSTEM

FUEL LINE REMOVAL / INSTALLATION 3. Pull on the fuel line for removal.
4. To install the line, verify the connections are clean
and free of debris.
5. Place the fuel line back over the fitting and slide the
green connector locking mechanism back into place.
Verify the connector tabs snap back into place.
6. Be sure fuel line is routed and retained properly.
7. Pull lightly on quick connector to ensure it is properly
connected to the fitting.

4
1. Place a shop towel around the fuel line to catch any
dripping fuel.
2. If removing either end of supply line w, pull open tabs
while moving green connector out to release the line.

9928689 - 2018 RZR RS1 Service Manual 4.25
© Copyright Polaris Industries Inc.