Page 290 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

6. Install the transmission shift cable to the linkage and 8. Install the propshaft into the bearing carrier.
install the circlip.
7. Install starter and main harness ground wires to the
frame. Torque ground screw to specification.

NOTE
Remove rear skid plate for ease of installation.
TORQUE
Starter/Main Harness Ground Fastener:
8 ft-lbs (11 Nm)

9. Install four propshaft fasteners r and torque to
specification.

TORQUE
Propshaft fasteners:
22 ft-lbs 30 Nm)

6.14 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.