Page 295 - Manual Oficina Polaris RS1 2018 e 2019

TRANSMISSION

29.Install muffler onto isolator mounts, and install two 31.Connect the oxygen sensor electrical connector and
muffler springs g. reinstall hinge clip retained to the frame.

32.Install muffler heat shield and install two fasteners
and washers retaining the heat shield. Torque
fasteners j to specification.

6

30.Install two fasteners h and springs retaining muffler
to the exhaust pipe. Torque fasteners to specification.

TORQUE
Muffler Heat Shield Fasteners:
8 ft-lbs (11 Nm)
33.Install muffler cover and four screws k. Torque
screws to specification.

TORQUE
Muffler to Exhaust Pipe Fasteners:
21 ft-lbs (28 Nm)

9928689 - 2018 RZR RS1 Service Manual 6.19
© Copyright Polaris Industries Inc.