Page 402 - Manual Oficina Polaris RS1 2018 e 2019
P. 402
BRAKE SYSTEM
MASTER CYLINDER INSTALLATION 2. Install new stat-o-seal, front left brake line banjo fitting
e, new stat-o-seal, front right brake line banjo fitting
1. Install new stat-o-seal, rear brake line banjo fitting,
new stat-o-seal and banjo bolt to the rear port on the w, new stat-o-seal, and brake pressure switch to the
master cylinder. front port on the master cylinder.
IMPORTANT IMPORTANT
Lubricate seals with a thin film of DOT 4 brake fluid Lubricate seals with a thin film of DOT 4 brake fluid
prior to installation. prior to installation.
3. Rotate the brake lines until they are oriented as
shown on the next page. Torque banjo bolt and brake
pressure switch to specification.
9.10 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.
