Page 411 - Manual Oficina Polaris RS1 2018 e 2019

BRAKE SYSTEM

CALIPER REMOVAL 6. Remove the two caliper mounting bolts w and
remove the caliper assembly from the front hub.
1. Elevate and safely support the front of the vehicle.

CAUTION
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur.

2. Remove the four wheel nuts and the front wheel.
3. Clean caliper area before removal.
4. Place a container below the caliper to catch brake
fluid when removing the line q. Remove brake line
from caliper.

5. Loosen brake pad adjustment set screw two to three
turns to allow brake pad removal after the caliper is
removed.

9

9928689 - 2018 RZR RS1 Service Manual 9.19
© Copyright Polaris Industries Inc.