Page 84 - Manual Oficina Polaris RS1 2018 e 2019

MAINTENANCE

4. Remove the battery hold-down bracket r. ENGINE / CHASSIS ELECTRICAL GROUND
Inspect the ground cable connections. Remove ground
terminals and clean if necessary.
1. Located next to the fuse block q, the chassis ground
connection w can be accessed by removing the hood
and front storage box.

5. Lift the battery out of the vehicle.

BATTERY INSTALLATION

CAUTION
Using a new battery that has not been fully charged can 2. Inspect the chassis ground terminals. Be sure the
damage the battery, result in a shorter life and hinder grounds are clean and tight.
vehicle performance.

1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure
with hold-down strap.
3. Coat the terminals with dielectric grease or petroleum
jelly.
4. Connect and tighten the red (positive) cable(s) first.
5. Connect and tighten the black (negative) cable (s)
last. Torque terminal fasteners to specification.

TORQUE
Battery Terminal Fasteners:
60 in-lbs (7 Nm)

6. Verify that cables are properly routed and reinstall the
storage box and center hood.

2.62 9928689 - 2018 RZR RS1 Service Manual
© Copyright Polaris Industries Inc.