Page 79 - Manual Oficina Polaris RS1 2018 e 2019

MAINTENANCE

SUSPENSION Shock Spanner / Clutch Spreader Tool:
2878925
SPRING ADJUSTMENT

The front and rear shocks have a ride height adjustment. NOTE
Suspension springs may be adjusted to suit different
riding conditions or vehicle payloads. Polaris does not recommend increasing the spring
adjustment by more than one inch (25.4 mm) over the 2
factory setting w as it may negatively impact vehicle
WARNING
stability. Always return the spring preload to the factory
Uneven adjustment may cause poor handling of the setting after the load is removed from the vehicle.
vehicle, which could result in serious injury or death.
Always adjust both the left and right spring equally.

The factory setting is appropriate for nearly all riding
conditions. If desired, the spring setting may be adjusted
to maintain vehicle clearance height when carrying
loads.
1. Raise and safely support front or rear of the vehicle
off the ground to allow the suspension to fully extend.
2. Using the shock spanner/spreader tool included in
the vehicle’s tool kit, turn the adjustment collar q to
increase w or decrease e ride height.

Spring Adjustment - Factory Setting (approx.)

YEAR MODEL FRONT REAR
2018 RZR RS1 3.00″ (76 mm) 9.30″ (236 mm)

9928689 - 2018 RZR RS1 Service Manual 2.57
© Copyright Polaris Industries Inc.