Page 206 - Manual Oficina Polaris RZR 570 13-18

FUEL SYSTEM

6. Be sure the top of the fuel tank is clean. If it requires 8. Carefully lift the fuel pump out of the fuel tank. As the
cleaning, hand wash the top of the tank to ensure no fuel pump assembly is being removed, be aware of
debris will enter the fuel system when the fuel pump float arm and pump pre-filter. Hold the float arm to
is removed. the pump body as you lift and tilt the pump to ensure
that the float arm is not bent when removed from the
tank.

WARNING
Failure to clean area around fuel pump may lead to
debris entering the fuel tank during service. Excessive
debris in fuel tank may cause premature wear of fuel
pump and/or cloggingof internal fuel filters.

7. Place the Fuel Pump Service Tool (PU-50326) over
the fuel pump PFA nut. Using a 1/2” drive ratchet or
breaker bar, loosen and remove the PFA nut.
Discard the PFA nut.

9. Transfer old fuel pump to a suitable container
capable of safely holding fuel. The fuel pump will
retain some fuel.
10. Inspect the inside of the fuel tank for debris (may
require flashlight and mirror). If debris like mud or
sand is present, fuel tank should be flushed and
cleaned out prior to installation of new fuel pump
assembly.
NOTE
NOTE
It is recommended to remove the fuel tank from the
Apply downward force on the fuel pump flange while vehicle and rinse it with a small amount of clean fuel.
removing the fuel pump PFA nut. Do not use water or any other chemicals to remove
debris.

4.20 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.