Page 207 - Manual Oficina Polaris RZR 570 13-18

FUEL SYSTEM

11. Remove new fuel pump assembly, gasket and PFA 14. Install fuel pump into fuel tank, hold float arm to the
nut from packaging. Use care not to bend float arm pump body and tilt assembly to ensure float arm
during un-packaging. Do not lift or carry fuel pump does not get caught or bent during installation.
assembly by the float arm.
15. Gently push down on fuel pump flange ensuring
12. Use cleaning wipes provided to clean fuel tank flange is centered.
surface and threads. Remove all debris, grease and
oil. Allow surfaces to dry completely. 16. Roughly align orientation mark on fuel pump
between the orientation marks on fuel tank to ensure
13. Install new PFA gasket onto fuel pump assembly float arm does not get bent or snagged.
using care not to damage gasket or bend float arm.

4

WARNING
Failure to align the orientation marks may lead to
interferences with the fuel level float arm and cause
incorrect function.

17. While maintaining downward pressure, thread new
PFA nut onto fuel tank and hand tighten. Use care
when starting PFA nut, ensuring threads are properly
aligned. Verify orientation marks are still aligned
between fuel pump and fuel tank.

9926813 R06 - 2013-2016 RZR 570 Service Manual 4.21
© Copyright Polaris Industries Inc.