Page 317 - Manual Oficina Polaris RZR 570 13-18

TRANSMISSION

22. Install the idler gear shaft assembly (A) and gear 24. Assemble shift shaft rail if previously disassembled.
cluster assembly (B) into the transmission housing,
all at the same time.

NOTE
23. Install the rear output shaft assembly (C). Rotate Both shift forks need to be orientated the same way, so
output shaft assembly to align slots with engagement that the shift fork pins are both offset to the same side
dog. Ensure bearing is fully seated upon assembly.
of the rail.
25. Install the shift shaft rail (D) and shift forks into the 6
transmission housing as an assembly. Be sure the
shift forks are engaged into the engagement dogs.

NOTE

Shift fork pins should be offset towards the input shaft
as shown above.

9926813 R06 - 2013-2016 RZR 570 Service Manual 6.47
© Copyright Polaris Industries Inc.