Page 318 - Manual Oficina Polaris RZR 570 13-18

TRANSMISSION

26. Inspect the shift drum for any damage or wear. 29. Install the transmission case cover and retaining
Inspect the splines of the shift drum. bolts. Torque bolts to specification.

27. Install the shift drum (E) into the transmission
housing. Lift up on the shift shaft rail (D) and move
the rail assembly towards the shift drum to allow the
shift fork ends to be installed into the shift drum (E).

TORQUE
Transmission Case Bolts:
17 ft-lbs (23 Nm)

30. Install new seals into the transmission case halves.
• The snorkel shaft seal (F), should be pressed in until it
seats against the housing counter-bore.
• The input shaft seal (G), should be pressed in until it
seats flush with the housing.
• The rear output shaft seals (H) and pinion shaft seal
(J) can be installed using a standard bushing installa-
tion tool. Seals should be installed just past the case
lead-in chamfer (.070" or 1.8 mm from outer face of
bore).

28. Apply a continuous bead of Crankcase 3 Bond
Sealant (PN 2871557) to the left hand transmission
mating surface.

6.48 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.