Page 400 - Manual Oficina Polaris RZR 570 13-18
P. 400
BRAKE SYSTEM
CALIPER REMOVAL CALIPER DISASSEMBLY / INSPECTION
CAUTION NOTE
Do not get oil, grease, or fluid on the parking brake Refer to the “Electronic Parts Catalog” for parking brake
pads. Damage to or contamination of the pads may caliper replacement parts information.
cause the pads to function improperly.
1. Remove the two caliper assembly bolts (C).
IMPORTANT
Be sure the parking brake is not engaged.
1. Remove the clip pin and pin q from the parking
brake cable.
2. Slide the brake pads and springs from the assembly.
NOTE
Retain the lever and ball bearings for reassembly.
2. Remove the two fasteners w retaining the parking
brake caliper mount / shift cable bracket. 3. Inspect brake pads for excessive wear. Replace as
needed.
3. Lift the parking brake caliper off the brake disc and
remove it from the vehicle. 4. Check the three steel balls for any signs of cracking.
Replace as needed.
5. Check ball seats in lever and stationary actuator. If
excessively worn, replace parts as needed.
9.14 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.
