Page 460 - Manual Oficina Polaris RZR 570 13-18
P. 460

ELECTRICAL

                TRANSMISSION (GEAR POSITION) SWITCH
                1. The transmission (gear position) switch is located on
                   the RH side of the transmission and can be
                   accessed through the RH wheel well area.
                2. Disconnect the transmission switch harness by lifting
                   the connector lock and pulling on the connector. Do
                   not pull on the wiring.
                3. Test the transmission switch continuity readings for
                   each gear position and compare to the specification
                   table below.
                                          RESISTANCE VALUE
                                          (WHEN MEASURED AT
                    GEAR POSITION
                                          SWITCH TERMINALS A
                                          AND B)
                    HIGH                  24 Ω
                    LOW                   75 Ω
                    NEU                   160 Ω
                    REV                   300 Ω
                    PARK                  620 Ω
















                                                                     TURN SIGNAL SWITCH (INTL)
                                                                     1. Disconnect the Turn Signal switch harness by
                                                                         depressing the connector locks and pulling on the
                                                                         connector. Do not pull on the wiring.






























                11.14                                                              9926813 R06 - 2013-2016 RZR 570 Service Manual
                                                                                               © Copyright Polaris Industries Inc.
   455   456   457   458   459   460   461   462   463   464   465