Page 458 - Manual Oficina Polaris RZR 570 13-18

ELECTRICAL

SWITCHES / CONTROLS

IGNITION KEY SWITCH / HEADLAMP IGNITION KEY SWITCH (INTL)
SWITCH 1. Disconnect the key switch harness by lifting the
1. Disconnect the key switch harness by lifting the connector lock and pulling on the connector. Do not
connector lock and pulling on the connector. Do not pull on the wiring.
pull on the wiring. 2. Test between the 4 sets of outputs (OFF / ON
2. Test between the 4 sets of outputs (OFF / ON LIGHTS / ON / START). If any of the tests fail,
LIGHTS / ON / START). If any of the tests fail, replace ignition switch assembly.
replace ignition switch assembly. • Turn the ignition key to ON LIGHTS. There should be
• Move the switch “ON LIGHTS”. There should be con- continuity between switch pins A, E and F; C and D.
tinuity between pins A and E; C and D. • Turn the ignition key to ON. There should be continuity
• Turn the ignition key to ON. There should be continuity between pins C and D; E and F.
between switch pins C and D; E and F. • Turn the ignition key to START. There should be con-
• Turn the ignition key to START. There should be con- tinuity between pins A and B; C and D; E and F.
tinuity between switch pins A and B; C and D; E and F.

11.12 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.