Page 92 - Manual Oficina Polaris RZR 570 13-18

MAINTENANCE

SUSPENSION

SPRING PRELOAD ADJUSTMENT
The front and rear shock absorber springs are adjustable
by rotating the adjustment cam to change spring tension
preload.
WARNING

Uneven adjustment may cause poor handling of the
vehicle, which could result in an accident and serious
injury or death. Always adjust both the left and right
spring preloads equally.

Suspension Spring Adjustment
1. Position the vehicle on a level surface and stop the
engine.
2. Raise and safely support the front or rear of the
vehicle off the ground to allow the suspension to fully
extend.
NOTE
The tires should not be touching the ground.

3. To adjust the suspension, rotate the adjustment cam
clockwise q to increase spring tension or counter-
clockwise w to decrease spring tension.

Shock Spanner Wrench
2871095

4. Each notch of the adjustment will add 6% - 8% more
preload to the spring over the primary position.

2.52 9926813 R06 - 2013-2016 RZR 570 Service Manual
© Copyright Polaris Industries Inc.