Page 121 - Manual_Polaris_RZR_ProXP-20-21

MAINTENANCE

COOLING SYSTEM
COOLANT STRENGTH COOLANT LEVEL INSPECTION
Test the strength of the coolant using an antifreeze The coolant tank is located on the front-left side of the
hydrometer. cargo box, under the coolant bottle access panel. The
coolant level should be filled to the FULL COLD level q
indicated on the recovery bottle. 2

• A 50/50 mixture of antifreeze and distilled water will
provide the optimum cooling, corrosion protection, and
antifreeze protection. With the engine at operating temperature, the coolant
level should be between the upper and lower marks on
• Do not use tap water, straight antifreeze or straight the coolant tank. If not, perform the following procedure:
water in the system. Tap water contains minerals and
impurities which build up in the system. 1. Ensure the vehicle is positioned on a level surface.
• Straight water or antifreeze may cause the system to 2. View the coolant level tank.
freeze, corrode, or overheat.
WARNING
Recommended Coolant:
Never remove the pressure cap when the engine is
Polaris 50/50 Extended Life Anti-freeze warm or hot. Escaping steam can cause severe burns.
2880514 (quart)
The engine must be cool before removing the pressure
2880513 (gallon)
cap.
3. If the coolant level is below the FULL COLD line,
inspect the vehicle for signs of leaking on the radiator,
engine, and coolant hoses.
4. Remove the pressure cap. Using a funnel, add the
recommended 50/50 coolant mixture to the FULL
COLD level on the tank.
Recommended Coolant:
Polaris 50/50 Extended Life Anti-freeze
2880514 (quart)
2880513 (gallon)

5. Reinstall the pressure cap.

NOTICE
Use of a non-standard pressure cap will not allow the
recovery system to function properly.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 2.35
© Copyright Polaris Industries Inc.