Page 119 - Manual_Polaris_RZR_ProXP-20-21

MAINTENANCE

6. Install the two mounting bolts. Torque fasteners to 3. Use a non-synthetic brush to clean the screen w on
specification. the arrestor. If necessary, blow debris from the screen
with compressed air.
TORQUE
Tensioner Mounting Bolts:
7 ft-lb (10 Nm)
2

7. Install the plunger bolt. Torque fastener to
specification.
TORQUE
Plunger Bolt:
15 ft-lb (20 Nm)

SPARK ARRESTOR
The spark arrestor should be cleaned after every oil
change to remove accumulated carbon. A plugged spark 4. Inspect the screen for wear and damage. Replace if
arrestor will affect engine performance. Replace a damaged.
cracked or damaged spark arrestor before running the 5. Reinstall the spark arrestor. Torque fasteners to
vehicle. specification.
NOTICE TORQUE
The spark arrestor should be cleaned each time the Spark Arrestor Fasteners:
machine is submerged in water/mud, and after every oil 8 ft-lb (11 Nm)
change.

1. Remove the spark arrestor retaining fasteners q.

2. Remove the arrestor from the end of the muffler.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 2.33
© Copyright Polaris Industries Inc.