Page 215 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

Service Limit 1.7704" (44.968 mm) CRANKCASE INSPECTION
B 1. Remove the oil drain diverter q from the upper
crankcase.
1.6137 - 1.6140"
Main Standard (40.988 - 40.995 mm)
Bearing
Service Limit 1.6129" (40.970 mm)
1.7718 - 1.7720"
Connecting Standard (45.003 - 45.010 mm)
Rod Bearing
Service Limit 1.7707" (44.976 mm)
3
C
1.6134 - 1.6137"
Main Standard (40.980 - 40.987 mm)
Bearing
Service Limit 1.6129" (40.970 mm)
1.7721 - 1.7724"
Standard
Connecting (45.011 - 45.019 mm)
Rod Bearing
Service Limit 1.7710" (44.984 mm) 2. Remove all traces of crankcase sealer from the
crankcase mating surfaces. Inspect the surfaces
closely for nicks, burrs or damage.
12.Whether installing a new crankshaft or re-installing
the original, refer to the bearing selection chart 3. Be sure alignment pins are in place where used.
provided in the Connecting Rod Bearing Selection 4. Be sure oil passages are clean and free of any
page 3.78 and Crankshaft Main Bearing Selection cleaning solvent.
page 3.79 procedures.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.71
© Copyright Polaris Industries Inc.