Page 211 - Manual_Polaris_RZR_ProXP-20-21

ENGINE / COOLING SYSTEM

8. Remove and clean oil pump pick-up i by removing 11. Lift the oil pump drive chain off the sprocket and
the one bolt o. remove the oil pump.

3

9. Remove the three bolts a that retain the oil pump s 12.Visually inspect the oil pump and drive sprocket f for
to the crankcase. wear or damage. Replace oil pump drive chain and
sprocket if worn or damaged. If any part of the oil
10.Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins d from the oil pump is damaged, the entire assembly must be
pump. Doing so allows for oil pump removal without replaced. Replace the oil pump seal g during
having to remove the pump drive sprocket. crankcase assembly.

NOTICE
NOTICE
Oil pump assembly is non-serviceable
If unable to extract the dowel pins from the oil pump,
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug. 13.Rotate the engine so the cylinder is facing up.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 3.67
© Copyright Polaris Industries Inc.