Page 254 - Manual_Polaris_RZR_ProXP-20-21
P. 254

ENGINE ELECTRICAL

                CPS REPLACEMENT
                1. If not done already; disconnect the CPS harness
                   connector (see Chapter 4 – CPS Test page 4.7).

                2. Using an 8mm socket, remove the CPS retaining bolt
                   q and remove the sensor w from the stator cover.






















                3. Unclip the wire harness retainer e and remove the
                   CPS harness from the retainer to allow replacement.
                4. Install new sensor using a light coating of oil on the
                   O-ring to aid installation.
                5. Torque the CPS retaining bolt to specification.
                                     TORQUE
                                CPS Retaining Bolt:
                                 9 ft-lbs (12 N·m)









































                4.8                                                        9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual
                                                                                                © Copyright Polaris Industries Inc.
   249   250   251   252   253   254   255   256   257   258   259