Page 301 - Manual_Polaris_RZR_ProXP-20-21

PVT SYSTEM

CLUTCH DISASSEMBLY 4. Remove and inspect the clutch spring r. Refer to
Drive Clutch Spring Inspection page 6.15
CAUTION procedure.
The clutch assembly is a precisely balanced unit. Never
replace parts with used parts from another clutch
assembly!

1. Using a permanent marker, mark the cover, spider,
and moveable sheave for reference, as the cast in X's
may not have been in alignment before disassembly.

5. Remove and inspect belleville washer t and washer
y. Replace if necessary.
IMPORTANT
Belleville washer must be installed with dome facing the
outer post. 6

2. Remove cover bolts q evenly in a cross pattern and
remove cover plate w.
BEARING INSPECTION
• Verify there is no binding or rough spots. If problems
are noted continue with disassembly.

3. Inspect area on shaft where bushing rides for wear,
galling, nicks, or scratches. Replace clutch assembly
if worn or damaged.

9930583 R01 - 2020-2021 RZR PRO XP / XP 4 Service Manual 6.11
© Copyright Polaris Industries Inc.